Located in the Student Union Building on the International Campus of Kyung Hee University, the Open Lab is a facility that supports prototype and coursework production. It is equipped with various facilities such as 3D printing, laser cutting, and UV printing, and is working to foster many makers through various maker education events.

Students of Kyung Hee University who need to produce coursework

Those who need graduation projects or prototype production

Those who want to use 3D printing at a low cost

The 3D printing service operates through an online order submission method.
Please refer to the guide below for how to submit an order.

The Open Lab 3D printing service is provided at an average cost of about one-third of that of general private 3D printing services.
This is because the Open Lab is operated on an unmanned basis, minimizing labor costs.
However, due to the nature of the operation, processing work and responding to inquiries may take time.

Although it varies depending on printing time and order volume, it generally takes about 2 to 3 days.
However, the production period may be longer during the following periods.

In such cases, it may take up to about one week, so please place your order with enough time in advance.

*If you need urgent work, you may use the expedited production service through MadeAll3D Daegu Branch.

*Based on business days after order confirmation and payment completion

The Open Lab 3D printing service is provided only under the following conditions.

Maximum single print size : 200x200x200(mm)

Completed printed items may be picked up directly at the Open Lab site.

When you enter through the main entrance of the Student Union Building, you can immediately see the 3D printing equipment in front of you.
Completed printed items are generally left next to the printer while attached to the bed (the plate to which the printed item is attached).

KakaoTalk_Photo_2026-03-30-17-50-00-side.jpeg

Slightly bend the bed to remove the printed item.
In most cases, the bed has cooled down after printing is completed, so the item can be removed easily without applying much force.

KakaoTalk_Photo_2026-03-30-17-56-23.jpeg

Please place the bed back in its original position.

After taking your printed item, please leave a message in the chat room.

Immediately after printing is completed, the bed may be hot, so please be careful to avoid burns.

If the printed item does not come off easily, do not force it off. Please contact the person in charge.

During Open Lab operating hours, a staff member may remove printed items and place them on the table next to the printer.

If your printed item is together with someone else's printed item, please place the other person's printed item on the table next to it.

Printed items that are not picked up for more than 2 weeks after completion will be disposed of.

In the case of Kyung Hee University Open Lab, the service operates only through unmanned printing, so pickup and post-processing of printed items are self-service.

Depending on the 3D printed model, removal of the brim (edge) and support structures may be necessary. Please refer to the guide below for basic post-processing methods.

스크린샷 2026-03-30 오후 3.46.51.png

The Open Lab is located on the 1st floor of the Student Union Building on the International Campus of Kyung Hee University.
When you enter through the main entrance of the Student Union Building, you can see the Open Lab space directly in front of you.
In addition, the separate room space on the left side based on the main entrance of the Student Union Building may be freely used if you need to study or work.

KakaoTalk_Photo_2026-03-30-17-49-55-side.jpeg

The equipment handled at the Open Lab is as follows.

3D printer (FDM 3D printing, single color, ordered through MadeAll3D)

UV printer (printing stickers, posters, etc., inquire directly with the Open Lab)

Laser cutter (CNC work such as acrylic and plywood, inquire directly with the Open Lab)

스크린샷 2026-03-30 오후 3.50.46-side.png

.
The printing equipment operates unmanned at all times, but on-site inquiries, equipment support, and use of other equipment are available only during weekday operating hours.

General Open Lab inquiries: 031) 201-3075
Order and printing inquiries: MadeAll3D chat service

경희대학교 국제캠퍼스 학생회관에 위치한 오픈랩은, 시제품 제작, 과제물 제작 등을 지원하는 시설로, 3D프린팅, 레이저 커팅, UV 인쇄 등 다양한 설비를 갖추고 있으며, 여러 메이커 교육 행사를 통해 많은 메이커 육성에 노력하고 있습니다.

경희대학교 과제물 제작이 필요한 학생

졸업 작품 / 시제품 제작이 필요한 경우

저렴한 비용으로 3D프린팅을 이용하고 싶은 경우

3D프린팅 서비스는 온라인 주문 접수 방식으로 운영됩니다.
주문 접수 방법은 아래 가이드를 참고해 주세요.
[주문 접수 가이드]

오픈랩 3D프린팅 서비스는 일반 민간 3D프린팅 서비스 대비 평균적으로 약 1/3 수준의 비용으로 제공됩니다.
이는 오픈랩이 무인 운영 기반으로 운영되어 인건비가 최소화되어 있기 때문입니다.
다만 운영 특성 상 작업 진행 및 문의 대응에 시간이 소요될 수 있습니다.

출력 시간과 주문량에 따라 차이가 있으나, 일반적으로 약 2~3일 정도 소요됩니다.
다만 다음과 같은 기간에는 제작 기간이 길어질 수 있습니다.

이 경우 최대 1주일 정도 소요될 수 있으므로 가능한 여유 있게 주문해 주시기 바랍니다.

*긴급 작업이 필요한 경우 메이드올 대구지사를 통해 빠른 제작 서비스를 이용하실 수 있습니다.

*주문 확인 및 결제 완료 후 영업일 기준

오픈랩 3D프린팅 서비스는 아래 조건으로만 제공됩니다

최대 단일 출력 크기 : 220x220x250(mm)

출력이 완료된 제품은 오픈랩 현장에서 직접 수령하실 수 있습니다.

학생회관 정문으로 들어오시면 정면에 3D프린트 장비를 바로 확인할 수 있습니다.
출력이 완료된 제품은 일반적으로 프린트 옆에 베드(출력물이 붙어 있는 판)에 부착된 상태로 놓여 있습니다.

베드를 살짝 구부려 출력물을 분리합니다.
대부분 출력이 완료된 후 베드가 식어 있기 때문에 큰 힘을 주지 않아도 쉽게 분리됩니다.

베드는 원래 있던 위치에 두시면 됩니다.

출력물을 가져가신 후 안내드렸던 채팅방에 메세지를 남겨주세요.

출력이 완료된 직후에는 베드가 뜨거울 수 있으니 화상에 주의해 주세요.

출력물이 잘 떨어지지 않는 경우 무리하게 힘을 주어 분리하지 말고 담당자에게 문의해 주세요.

오픈랩 운영 시간 중에는 담당자가 출력물을 분리하여 옆 테이블에 올려둘 수 있습니다.

본인의 출력물이 다른 사람의 출력물과 함께 있는 경우, 다른 사람의 출력물은 옆 테이블로 올려주세요

출력 완료 이후 2주 이상 수령되지 않은 제품의 경우 폐기 처리됩니다.

경희대학교 오픈랩의 경우 무인 출력으로만 운영되므로, 출력물 수령 및 후처리는 셀프입니다.

3D프린팅 모델에 따라 브림(테두리)제거, 서포트 제거가 필요합니다. 기본적인 후처리 방법은 아래 가이드를 참고해 주세요.

오픈랩은 경희대학교 국제캠퍼스 학생회관 1층에 위치하고 있습니다.
학생회관 정문으로 들어오시면 정면에 바로 오픈랩 공간을 확인하실 수 있습니다.
또한 학생회관 정문 기준 좌측 별실 공간에서는 공부나 작업이 필요한 경우 자유롭게 이용하실 수 있습니다.

오픈랩에서 취급하는 장비는 다음과 같습니다.

3D프린터 ( FDM 3D프린팅, 단일 색상, 메이드올을 통해 주문 )

UV 프린터 ( 스티커, 포스터 등 인쇄, 오픈랩 직접 문의 )

레이저 커팅기 ( 아크릴, 합판 등 CNC 작업, 오픈랩 직접 문의 )

까지입니다.
출력 장비는 무인으로 상시 운영되나, 현장 문의·장비 지원·타 장비 이용은 평일 운영시간에만 가능합니다.

오픈랩 일반 문의: 031) 201-3075
주문, 출력 문의: 메이드올 채팅 서비스

KHU OpenLab

경희대학교 오픈랩

khu openlab 경희대학교 오픈랩 khu openlab locations khu khu openlab 경희대학교 오픈랩 이용 대상 경희대학교 과제물 제작이 필요한 학생 졸업 작품 / 시제품 제작이 필요한 경우 저렴한 비용으로 3d프린팅을 이용하고 싶은 경우 소개 경희대학교 국제캠퍼스 학생회관에 위치한 오픈랩은, 시제품 제작, 과제물 제작 등을 지원하는 시설로, 3d프린팅, 레이저 커팅, uv 인쇄 등 다양한 설비를 갖추고 있으며, 여러 메이커 교육 행사를 kyung hee university open lab about the open lab located in the student union building on the international campus of kyung hee university, the open lab is a facility that supports prototype and coursework production. it is equipped with various facilities such as 3d printing, laser cutting, and uv printing, and is working to foster many makers through various maker education events. open lab 3d printing service eligible users students of kyung hee university who need to produce coursework those who need graduation projects or prototype production those who want to use 3d printing at a low cost how to use the 3d printing service operates through an online order submission method. please refer to the guide below for how to submit an order. [order submission guide] pricing the open lab 3d pr

terms of service 서비스 이용약관 terms of service agreement terms of service terms of service these terms shall take effect on march 23, 2026. article 1 purpose these terms are intended to prescribe the rights, obligations, and responsibilities between madeall co., ltd. (herei terms of service these terms shall take effect on march 23, 2026. article 1 purpose these terms are intended to prescribe the rights, obligations, and responsibilities between madeall co., ltd. (hereinafter, the “company”) and users in connection with the use of the internet website operated by the company and all services provided by the company, including 3d printing, modeling, related ordering, consultation, and membership services (hereinafter, the “services”). article 2 definitions “website” means the internet website and related online environment operated by the company for the provision of information on goods or services, order receipt, consultation, member management, and the like. “user” means a member or non-member who uses the services provided by the company in accordance wit

Terms of service

privacy policy 개인정보처리방침 privacy policy agreement privacy policy privacy policy last updated: march 23, 2026 madeall co., ltd. (hereinafter, the "company") establishes and discloses this privacy policy as follows in order to protect the personal information of data privacy policy last updated: march 23, 2026 madeall co., ltd. (hereinafter, the "company") establishes and discloses this privacy policy as follows in order to protect the personal information of data subjects and to promptly and smoothly handle related grievances pursuant to article 30 of the personal information protection act. article 1 purpose of processing personal information sign-up and identity verification provision of goods or services customer inquiries and complaint handling service improvement and statistical analysis marketing and advertising use (where separate consent is obtained) article 2 period of processing and retention of personal information the company processes and retains personal information within the retention and use period prescribed by law or within the peri

Privacy Policy

marketing usage 광고 홍보 마케팅 동의 marketing usage agreement marketing usage consent to receive advertising information and consent to the use of information for marketing [optional] consent to receive advertising information from madeall3d madeall3d obtains this consent in or consent to receive advertising information and consent to the use of information for marketing [optional] consent to receive advertising information from madeall3d madeall3d obtains this consent in order to provide members with advertising information such as website update news, notices of new service launches, information on promotions and events, and information on benefits and discounts. the information subject to receipt consists of the email address and mobile phone number provided to the company at the time of sign-up or in the course of using the services, and advertising information may be sent through electronic transmission media such as email, text messages (sms/lms/mms), and kakaotalk messages. this consent is optional, and even if you refuse to give consent, there will be no